Bottle Filling Machine

Bottle Filling Machine Characteristics: 1.Beeline design is easy to connect with other machine. 2.Easy to dismantle and install. 3.Parts that contact the medical liquid are made of stainless steel except silica gel tube, as well as other materials of parts and components; 4.Different filling containers can be changed within short period, then high efficiency can be gained. 5.Automatic correcting function is available to gain precise and reliable loading. Moreover, the filling part adopts imported stepping system from Germany with good reliability and high power. 6. Discharging and filling test are available to avoid waste. 7.Machine can work automatically in the process of filling and adding stopper without manpower. 8.Double-head, four-head or six-head type are equipped for different products and clienteles with different output. 9. Interface is touching screen or digital type, clienteles can select freely. Working Principle: It is rated type automatic filling and stoppering machine, beeline moving method which gives priority to pneumatically actuated drive has been adopted. Containers will be on the filling position making use of PLC logic controller, different induction system and time difference of the cylinder. After that, open containers that have been filled and send the containers that have not been filled onto filling bench; containers that have been filled are delivered to pull on the stopper, and then go out of the machine via conveyer belt. Repeated, this process can be finished. Technical Parameter: Loading range: 50 to 150ml Output: 50 to 120bottles/minute (according to size of bottle) Permissible loading error: ≤±3% Power supply: AC220V/50Hz Clean air pressure: 0.6-0.8MPa Power: 1.5-2kw Gross Weight: about 460kg Overall Dimension: 2750×1000×1560mm3 (length× width× height)