Bottle Cleaning Machine

Bottle Cleaning Machine Working Principle: After the tray with bottles is pushed into bottle overturning hopper, overturning tray cylinder will work after pressing the button to deliver the tray to ultrasonic generator water tank (make use of cavitating function of ultrasonic).At the same time lower spraying pin plate cylinder will start to work to drive the spraying pin into bottles that have been cleaned (that are cleaned last time), three-water three-steam cleaning will be carried out after signal is received by magnetic switch in front of turning cylinder. After being finished, overturning cylinder and lower spraying pin plate will restore, pushing cylinder will push the tray onto bottle outlet tray after magnetic switch at the end of overturning cylinder catches the signal. At the same time, pushing tray will restore itself after receiving the signal from magnetic switch at front of pushing cylinder. Then the whole process will be over after the oriented cylinder draws back. Characteristics: Fast speeds-- bottles are cleaned on trays and cleaning period of every tray is very short, therefore the cleaning is fast fitting for manufacturers dealing with large batches. No damages-- bottles keep under stable state and have no impact with machine in the cleaning process, therefore there will not be damages. Easy maintenance--it adopts many pneumatic components as drive, then structure of the machine is very simple. Malfunction lowers greatly and maintenance is also easy. Low noise-- simple structure and no shocking lower noise which can ease operators. Easy operation--operator can work without any training. One cleaning process can be finished after pressing one button. High reliability--whole working process is controlled by PLC imported from Germany with stable and reliable performance. Clean and clear--brush is not necessary for ultrasonic cleaning machine, therefore hair residue will not occur, together with high efficient steam filtering device assuring quality of the water. Automatic water supplythe machine will control water line in the water tank after inlet penstock is opened. Technical Parameter: Output: about 100,000pieces for every 5ml bottle Voltage of air supply: 3-4kg/cm2 Voltage of water supply: 3-4kg/cm2 Power supply: three-phase four-wire 380V/50Hz Ultrasonic power: 0.6kw Power: 5kw Gross Weight: about 400kg Overall Dimension: 1300×1000×1200mm3(length× width×height)