Automatic Capping Machine

Automatic Capping Machine Working Principle: After being delivered onto bottle sending tray, bottles will enter into bottle rail and equational tray under force of turbine coiling pieces. Then bottles will move intermittently, pull on aluminum cover and cap well, then go out of the equational tray and the rail to step into next procedure. Characteristics: Newly design, adopt top-grade stainless steel materials and water leaking resistant treatment, conform to GMP standard.Parts of the table-board all adopt high vertical pole with beautiful appearance and can be cleaned conveniently.Bottle sending protection: if bottles are disordered or enough ones can not be offered on the rail, the machine will automatically stop, no bottles should be blocked.Bottle delivering tray is dragged by one motor with stepless speed regulation or rotation speed will surpass the limit. Technical Parameters: Output: 80 to 130 bottles/ minute Power Supply: three-phase four-wire 380V/50Hz Power of Motor: 0.55kw Power: 0.65kw Gross Weight: about 280kg Overall Dimension: 1100×800×1400mm3 (length×width× height)